CUAV V5 + Pixhawk V5 Autopilot Pix Flight Control FC STM32F765 216MHZ 2MB FLASH / 512K RAM for FPV RC Drone Quadcopter Helicopter

Note: GPS now updates to “NEO V2”

V5 + autopilot

The V5 + Autopilot is an Advanced Autopilot for college and commercial integrators. Designed by CUAV in collaboration with the px4 team. Based on the Pixhawk FMUv5 open hardware design, a highly modular board that uses standard Pixhawk pinouts for its external interface, allowing for carrier board integration. Out of the box pre-installed with PX4 open source autopilot and fully ArduPilot compatible.

Quick summary.

FMU Main Processor: STM32F765
- 32-bit Arm® Cortex®-M7 216MHz 2MB memory 512KB RAM
Processor IO: STM32F100
- 32-bit Arm® Cortex®-M3 24MHz 8KB SRAM
On-board sensors:
- Accelerometer / Gyroscope: ICM-20689
- Accelerometer / Gyroscope: BMI055
- Magnetometer: IST8310
- Barometer: MS5611
Interfaces:
- 8-14 PWM outputs (6 from IO, 8 from FMU)
- 3 dedicated PWM / capture inputs on FMU
- Dedicated R / C input for CPPM
- Dedicated R / C input for PPM and S.Bus
- Analog / PWM RSSI input
- S.Bus servo output
- 5 general purpose serial ports
- 4 I2C ports
- 4 SPI buses
- 2 CES series CANBuses
- Analog inputs for voltage / current of 2 batteries
Feeding system:
- Power: 4.3 ~ 5.4V
- USB input: 4.75 ~ 5.25V
- Servo rail input: 0 ~ 36V
Weight and measurements:
- Weight: 90g
- Dimensions: 85.5 * 42 * 33mm
Other features:
- Operating temperature: -20 ~ 80 ° C (measured value)