تقسیم ولتاژ هاب OSD8-SE با دوخروجی ولتاژ 5volts at 1.5A and 10volts at 1.5A

• Input voltage range: 9 – 27VDC(3~6s LiPo) w/ TVS protection
• Regulated 5V(POSCAP filtered) and 10V(MLCC filtered) outputs
• Current Rating: 4X30A (Max.4x39A)
• Current sensor: 184A
• Current signal output: 3.3V ADC for Flight controler
• Built-in STOSD8-SE
• 46x36x4mm, 9g
• Mounting holes 30.5mm Ø3mm

BEC 10V Outputs

• Designed for Video TX or FPV camera.
• Voltage: 10.0 +/- 0.2VDC
• Continuous current: 1.5 Amps (Max.2A 10s/minute)
• Output Ripple: 15mV (VIn=24V, [email protected] load)
• Short-circuit tolerant (2 seconds/minute)
• 10V can be used to power cameras labeled as 12V
• The 3S LiPo input voltage should be 10.8V plus

BEC 5V Outputs

• Designed for RC Receivers, Flight controllers, OSD, and Servos.
• Voltage: 5.0 +/- 0.1VDC
• Continuous current: 1.5 Amps (Max.2A 10s/minute)
• Output Ripple: 23mV (VIn=24V, [email protected] load) Short-circuit tolerant (2 seconds/minute)
• Short-circuit tolerant (2 seconds/minute)

STOSD8 

• Autodetect PAL/NTSC
• Dynamic on screen info
• Automatic flight timer
• Automatic cell detection
• Low battery alarm
• Exceeding mAh alarm
• Min.voltage & Max.current recorder
• Onscreen Pilot ID
• Firmware upgradable
• Simple GUI & setting
• Plug & Play