توصیف
جزییات
Description:
Brand Name: FlySky
Item Name: Flysky FS-TH9X 2.4G 9CH Transmitter
Channels: 9 Channels
Model Type: quadcopter,glider, helicopter, airplane, also car or boat
RF Range: 2.40-2.48GHz
Bandwidth: 500Hz
Band: 160
RF Power: less than 20DB
2.4G System: AFHDS
Modulation: GFSK
Code Type: PPM/PCM
Senditivity: 1024
LCD Type: 128 x 64 dot
LCD Backlight: No
Low Voltage Warning: yes(less than 9V)
DSC Port: yes(3.5mm:output:PPM)
Charger Port: yes
Size: 180 x 220 x 70 mm
Power: 12VDC or 8 x 1.5AA
Weight: 670g
Mode: Mode 2
Control Range: 350-400m
Model Memory: 8
The transmitter functions:
Throttle curves
Pitch curves
Endpoint adjustments
Subtrim
Swash AFR mixes
Servo reversing
Timer
Dual rate
Exponential
Flaperons
V-Tail mixing
Elevons
Flysky FS-R9B 2.4G Receiver:
Product Number: FS-R9B
Channels: 8 Channels
Receiving Sensitivity: -105dBm
Frequency Range: 2.4-2.48GHz
Frequency Width: 500KHz
Wave Band: 160
Modulation: GFSK
2.4G Mode: Automatic FM digital system
Channel Resolution: 1024 classes
Power: 4.0-6.55V DC
Weight: 18g
Antenna Length: 26mm
Size: 52*35*15mm
Color: Grey
Certificate: CE,FCC
How to bind the RX (receiver) to the TX (transmitter):
1. Plug bind plug into BAT, turn on plane/heli, the LED light should flash (make sure power is connected to RX via ESC)
2. Hold down bind button on transmitter module while turning on the TX
3. The light should go steady now
4. Let go of bind button, turn off plane/heli, remove bind plug, turn off TX
5. Turn on TX and then turn on plane/heli
Note:
If you need to connect the transmitter to a Lipo battery,please pay attention to the positive and negative of the interface,and connect the battery to the two pins on the left.
Package Included:
1 x FlySky FS-TH9X 2.4G 9CH Transmitter Mode 2
1 x FS-R9B 8CH 2.4GHz Receiver
1 x RM002 2.4GHz Module
1 x Bind Plug
توضیحات اضافی
اطلاعات اضافی
تولید کننده | flyskyrc |
---|
برچسبها
نظرات
- برای نظر دادن به این محصول اولین باشید