ارسال تصویر 2.4 DJI LightBridge 2.4GHz Full HD

Introducing the DJI Lightbridge, 2.4G Full HD Digital Video Downlink. DJI Lightbridge is an all new revolutionary 2.4G Full HD digital video downlink. DJI Lightbridge offers extremely powerful equipment packed into a small and light-weight form factor. By offering 1920 x 1080p@30fps video data transmission from up to 1.7km (1.05miles) away, it's the ideal solution for the professional aerial photographer and FPV users. Set yourself free and remove the limits from low definition analog video transmitters.

Features
2.4G Full HD Digital Video Downlink
1920x1080@60fps input and 1920x1080@30fps output
Less than100mWground unit transmission in full compliance with CE and FCC certification
5dBi omni-directional antenna offers an enormous distance of up to1.7 km (1.05 miles)
Optional 14dBipatchantenna boosts transmission distance tremendously to 5km (3.1 miles)
HDMI input
DJI Zenmuse gimbal input (Digital Video/Power Supply/OSD Data)
USB 2.0 image data output for iOS and Android phones and tablet synchronization
Uplink remote control transmission and downlink video work simultaneously on2.4GHz
Remote control data travels to the uplink via the TX-Thru Port at the same time that video is streamed back down all without interference
Support for two remote controls: one for flight control (10 Channels) and the other for gimbal control(6 Channels). Control signals are received in the air and then transmitted to the flight controller through D-BUS
Frequency Hopping Spread Spectrum (FHSS) + Direct Sequence Spread System (DSSS)
technology is used for uplink transmission to enhance stability and offer anti-jamming capability
MIMO multi-antenna technology and OFDM modulation methods along with advanced algorithms are utilized for downlink transmission to enhance data bandwidth, improving dynamic performance and increasing stability even in harsh environments
Channel interference is constantly monitored during downlink transmission with automatic switching between 8 channels for the best possible signal
Up to 8 downlinks can be connected for parallel streaming and work independently without interference
OSD functionality can be turned off via mobile software for HDMI and iOS/Android Output
DJI A2, WooKong-M and Naza-M V2 flight controllers
Phantom 2, with DJI 5.8G radio transmitter
A single air unit can transmit to multiple ground units sending video to multiple screens. (Only one of the ground units can send a control signal while additional ground units will only be able to receive a video signal)
Encryption ensures only authorized devices can receive data which can be programmed via mobile device software
Ground unit has a built in high capacity 4000mA battery offering up to 4.5hours of use per charge
Rechargeable through the supplied charger or via a3S~6S Li-Po power battery. A full charge takes approximately1.5 hours.
LED battery level indicator
Also functions as a USB charger for mobile devices prolonging the life of peripheral equipment
Aluminum alloy casing
Extreme internal and external shielding for interference protection

Specs
Video Input: HDMI, AV, DVSB For DJI Gimbals
Supported Formats (HDMI): 720p50, 720p60, 1080i50, 1080i60, 1080p25, 1080p30, 1080P50, 1080P60
Supported Formats (AV): PAL25, NTSC30
Radio Frequency: 2.405-2.4835GHz, FCC/CE certified
Interface (Ground Unit): LED indicator Power switch Charging interface USB 2.0, HDMI, Remote control input supports two controllers
Interface (Air Unit): LED indicator, DBUS HDMI AV, Gimbal Port, Frequency switching button
External Case: Aluminum alloy
Power supply (Ground Unit): DC power input: 11~26V, Built-in lithium battery, Power consumption: 6W without external USB equipment
Power consumption: 8W with external USB equipment
Power supply Air Unit
DC power input: 11~26V
Power consumption: 8W during normal use
Dimensions: Ground unit: 125mm x 89mm x 20mm, Air Unit: 67mm x 47mm x 20mm
Weight: Ground unit: 360g
Air unit: 70g